Azimut 50

• Planing with chines to increase lift and reduce roll
• Dead rise at stern: 12°
• Dead rise at center of keel: 21°

• Manufacturer VOLVO Penta
• Model D11 - 670 mHp
• Type Diesel engine
• Max. power 2x 493 kW

• Manufacturer ZF
• Model 325-1 IV
• Reduction ratio 1:2037

• Configuration Shaft line
• Shaft length 3,126 mm
• Shaft angle 11°
• Shaft diameter 55 mm
• Distance between centers 1,400 mm
• Building material DUPLEX STEEL
• Support OTMAN axle supports
• Hull casing diam. 55

• Model 4 blades
• Building material NiBrAl
• Diameter 740 mm
• Pitch 1,400 mm
• Profile C-foil

• Rudders made of stainless steel

• Accessible from the outside, cockpit stairs, port side.
• GRP cockpit stairs with 6 steps
• Teak external step flooring
• Non-slip floor
• Access door: watertight in aluminum and Plexiglas
• Smoked plexiglas windbreak with stainless steel and aluminum frame
• GRP rollbar
• Handrail: NMMA compliant stainless steel (tube 30 X 1.5) (stern fly handrail,fly access protection handrail, Fly railing, mobile fly handrail)
• Fore sunbed area
• Helm seat for 1 person
• Adjustable steering wheel (4-spoked steering wheel white painted)
• C-shaped sofa connected to sunbed area
• Teak table with central stainless steel leg
• 1 bow locker (in front of dashboard)
• 1 locker under bench, starboard side
• Manual depth searchlight
• Stainless steel light mast
• Flybridge dashboard consisting of:
• - 1 engine display
• - BRONZE series electronic navigation instruments
• - Engine start-up controls
• - Bow anchor winch controls
• - Horn controls
• - Trim tab control
• - 12V socket
• - Chain meter counter
• Scuppers with stainless steel grids
• “50” logos, placed externally on the rollbar glass, one on each side
• Azimut logos, placed externally on the tails of the GRP superstructure, one on each side

• Anchor chain and fender locker with water drainage
• DELTA 25kg galvanized steel anchor
• 75 m long high strength 10 mm gaged chain
• 2000W winch
• 2 stainless steel cleats L. 300 mm oval tube
• Sunbed area with non-slip finish
• Chain washing pump
• Non-slip floor
• Scuppers with stainless steel grids
• Forward facing sofa with 6 seats, including cushions for seats and backrest 

• Refueling: 2 "Diesel" refueling plugs diam. 88 mm with cover
• Fresh water filling: 1 "Water" refill plug, diam. 85 mm
• Black water outlet: 1 "Waste" water plug diam. 75 mm without cover
• 2 stainless steel cleats L. 300 mm oval tube (intermediate)
• Non-slip floor
• Side handrail
• Rub-rail: in stainless steel and high resistance PVC. Knurled section = (39.8 X 7.8) mm
• Pulpit

• Double cockpit access via stainless steel and Plexiglas gate
• 2 stainless steel cleats H. 110 mm W. 350 mm
• 2 handrails (RH and LH) on the side of the deckhouse
• Mooring station: dim. 1230X210
• Aft stainless steel left/right chock
• Vertical stainless steel double door with tempered glass
• 4-seater C-shaped cockpit bench (in GRP integrated in the deck, width 2.47 m)
• Cockpit bench cushions
• 1 locker under cockpit bench, LH side
• 1 port deckhouse column locker
• Lockers below cleat (one each side)
• RH locker with battery cut-out
• Engine room access via door in cockpit floor
• Crew cabin access via hatch in cockpit bench
• Non-skid floor (excluding side walk around access steps)
• Flybridge access stairs handrail
• 2 loudspeakers
• Lighting: spotlights in cockpit ceiling panel
• Hot and cold water shower head
• Scuppers with stainless steel grids

• Hydraulic platform
• Stern platform lights
• Non-slip floor
• Swimming ladder
• INSTALLABLE TENDER:
• - WORKING DIMENSIONS OF PLATFORM: 3.5 x 1.13 m
• - System max. net capacity (SYMMETRICAL): 700 kg (excluding platform)
• - Max. permitted capacity (asymmetrical): 380 kg (including platform)
• - HYPOTHETICAL PLATFORM TENDER: 3.2 x 1.5 m.
• - HYPOTHETICAL WILLIAMS TENDER: WILLIAMS Turbo Jet 285

• Single helm seat
• Manually operated window
• Leather adjustable steering wheel with stainless steel spokes
• Dashboard consisting of:
• - Bow thruster control
• - BRONZE series electronic navigation instruments
• - Communication systems (VHF)
• Electronic remote controls CRUISE COMMAND
• - Magnetic compass
• - Trim tab switches
• - Trim tab indicators
• - Horn, navigation light, wiper switches
• - Activation of bilge pumps
• - Emptying of black and gray water tanks
• - Engine room ventilation
• - 12V socket
• - Shore power socket indicator light
• - Chain wash pump switch
• - Fuel tank, black water, grey water and fresh water level gage on Raymarine display (constant display)
• Engine control instruments:
• - multifunction display for controlling the Volvo Penta engines
• - engine start-up buttons
• - alarm indicator lights

• Pickled oak cupboards
• Carpeted floor
• Cupboard on port side
• 1 4-seater C-shaped sofa on starboard side
• Provision for TV system with aerial
• Ceiling and wall upholstery: 2-tone fabric (ivory and brown, Nextel)
• Roman blinds for stern windows and sliding blind for saloon door
• 2 loudspeakers

• Dining area on left with rectangular foldable table
• Carpeted floor
• Below deck access ladder with carpeted steps

• Below deck to left of stairs
• Galley top and floor in laminate
• Ceramic glass  range with 4 plates
• Overhead extraction hood with active carbon filters
• Microwave oven + grill
• 1 stainless steel sink
• Refridgerator + 220-liter upright freezer
• Openable porthlight

• Carpeted below deck access
• Spotlight
• Fabric bulwark upholstery
• Corridor grabrails

• Located midship
• Double bed placed in the center astern with headboard
• 2 bedside tables
• Vanity unit with mirror
• Cabinets with doors and shelves on both sides
• Wardrobe with hanger bar on port side 
• wardrobe with shelves in front of bed
• Spotlights
• 2 openable portlights
• 3 + 3 rectangular hull windows
• Direct access to the head from the corridor leading to the owner's cabin with internal stairs
• 1 mirror in wardrobe
• Metal Venetian blinds
• Fabric wall upholstery and wood paneling
• Fabric ceiling panels + some areas in Nextel
• Provision for TV system
• 220 V sockets
• Air conditioning system control panel (if A/C installed)

• Located forward of the owner's cabin on starboard side
• Access from owner's cabin
• GRP top and cognac (brown) colored Vetro Freddo washbasin
• Tecma toilet
• Chromed mixer taps
• Separate shower enclosure; flat shower door
• Chromed shower rail
• Wall unit with 1 openable door next to washbasin top and underbasin cabinet with shelves
• Spotlights
• 1 openable portlight
• Metal Venetian blinds
• Non-slip GRP flooring in shower
• Sockets
• Head accessories
• Head air extractor: forced extraction (from the shower ceiling panel)

• 2 fixed bunk beds
• 1 bedside table next to beds
• 1 wardrobe with coat rack and shelves
• Lockers under bed
• Fabric ceiling panel + some areas in Nextel
• Fabric bulwark upholstery
• Openable round portlight
• Metal Venetian blinds
• Carpeted floor
• Spotlights
• Access to head leading to corridor
• Sockets
• Air conditioning system control panel (if A/C installed)

• Positioned abaft of the VIP cabin on the port side
• Washbasin with GRP top
• Direct access from the VIP cabin or from the corridor
• GRP top and cognac (brown) colored Vetro Freddo washbasin
• Chromed mixer tap
• Tecma toilet
• Separate shower enclosure with glass door 
• Chromed shower rail
• Spotlights
• Underbasin cabinet with shelves
• Metal Venetian blinds
• Non-slip GRP flooring in shower
• Head extractor: forced extraction (from the shower ceiling panel)
• Head accessories
• Openable round portlight
• Socket

• Located towards the bow, it is accessed via a central corridor
• Foldaway double bed with large locker underneath
• Wooden headboard
• 2 openable wall units with 2 storage areas (each side) over the windows
• 1 wardrobe on the starboard stern wall with hanger bar
• 1 wardrobe on the port stern wall with shelves
• Fabric ceiling panels + some areas in Nextel.
• Spotlights
• Emergency exit in ceiling through concealed rectangular hatchway leading to fore sunbed area
• Direct access to guest head
• Mirror inside wardrobe
• 2 openable round portlights inserted in windows 
• Metal Venetian blinds
• Fabric-upholstered bulwarks
• Fabric-upholstered headlining
• Carpeted floor
• Air conditioning system control panel (if A/C installed)
• 220 V sockets

• Located at stern
• Access from cockpit bench
• Single bed with under-bed compartments
• 1 wall unit
• 1 wardrobe
• 1 head cabinet
• Fabric bulwark upholstery
• GRP ceiling + upholstered panels
• Bulwark shelves, 1 at the foot of the bed, 1 over the rubber hold
• Openable round portlight with 250 mm. dia. over cockpit bench
• GRP non-slip floor
• Spotlights
• Fabric blind

• Tecma toilet
• White resin washbasin
• Chrome mixer with extractable shower head
• Shower area with waterproof curtain
• Wall unit with mirror
• Under sink door
• Power socket
• Head accessories

• Shore-powered power supply
• Onboard voltages:
• - 230V-50Hz AC
• - 24V DC from battery bank
• - 12V DC for VHF equipment and cigarette lighter socket
• The main boards are in the wheelhouse, engine room and crew area.
• The power circuit breakers that protect the instrument panel, engine controls, navigation instruments and shore power socket and generator selector switches are located in the wheelhouse.
• Other power circuit breakers that protect the various 24V DC and 220V AC utilities are located under the wheelhouse and are protected by a cover.
• Additional circuit breakers are located on the main panels in engine room to protect the various 24V DC utilities and the 230V AC utilities in the crew area
• Junction boxes are installed in all areas.

Galvanic current insulation

• zinc anodes

• 1 standard 3.5 kW 230V generator in engine room

• 1 50A socket astern
• 1 for air conditioning (OPT)

• Services: 6 AGM type batteries, 270 Ah 24V DC,
• Engines: 4 AGM type batteries, 180 Ah 24V DC,
• Generator: 1 AGM type batteries, 70 Ah 12V,
• 24 V battery charger: 24/60 3 Out- 60A-10A-10°
• 12V battery charger:12/15 2 Out- 15°

• AC sockets: 230V for main utility power supply, EU type
• DC sockets: cigarette lighter type (wheelhouse)
• 24 V lighting (halogen for outside and LED for inside)
• 24V watertight external lights

• For STD equipment, see the paragraphs on “flybridge instrument board equipment” and “internal instrument board equipment”
• For a detailed list of alternative/additional equipment available, please refer to the Optionals price list

• 3 24V electric pumps (crew cabin, engine room, owner's cabin) automatically operated by means of level switch + wheelhouse controls.
• 2 manual emergency pumps; 1 in owner's cabin and 1inside cockpit's starboard locker
• 1 Supersub Smart 650 24 V electric bilge pump, 24 l/min
• Level alarms in wheelhouse
• Rapid engine room emptying connected to port engine seawater system

• Handle in cockpit on starboard side and emergency pushbutton on emergency panel
• 1 12 kg homologated cylinder with nozzles above the engines
• Fuel delivery shut-off to engines and generators

• 2 aluminum tanks in engine room with a capacity of 1100 l and a total capacity of 2200 l
• Electronic fuel level indicator on starboard tank
• Optical fuel gage on port tank
• Single settling filters for engines
• 1 filter for generator
• 2 refueling plugs on walk arounds
• 2 vents on bulwark
• Remote diesel shut-off (engine and generator) via 24V solenoid valve
• Pipe connecting the two tanks to adjust the fuel level
• Fuel drawing tap on starboard tank

• 590 l polyethylene tank located under the bed in owner's cabin
• Water refilling on starboard walk around
• Level sensor with electronic gage in wheelhouse
• 1 tank vent on starboard bulwark
• 1 water pressure pump with electronic control
• 1 water heater, 40 l
• Stern shore power socket on port side
• Hot/cold water line: heads, galley, cockpit, bathing platform shower;
• Cold water only in flybridge washbasin; cold water only in engine room
• Fresh water toilet flushing
• System that can be divided by ACORN manifolds
• Toilet fresh water supply

• 175 l polyethylene tank located under the floor in the galley/corridor
• Level sensor with gage in wheelhouse
• 1 tank vent on starboard bulwark with anti-odor filter
• MANUAL pump operating switch with control switch in the wheelhouse
• 1 macerator pump, 34 l/min 
• Suction point from starboard walk around
• Outboard discharge
• Tecma toilet (with macerator pump). All toilets discharge into a tank

• 175 l polyethylene tank located under accommodation corridor
• Tank vent on port bulwark
• Level sensor with gage in wheelhouse
• Water discharge directly into the sea by means of pump
• MAN/AUTO pump operating switch with control switch in the wheelhouse
• Three-way valve in galley for deciding whether to discharge into the sea or in the tank
• 1 pump 26 l/min
• Collection tray wth built-in pump with outboard discharge, under crew tray.

Seawater system

• Engine cooling system: includes 2 x 2" seawater intakes with filter and valve (1 per engine)
• Generator cooling system: includes 1x1" seawater intake with filter and valve
• Air conditioning cooling system: 1x1" seawater intake with filter and valve
• Chain wash pump: 1x 1/2 " seawater intake with filter and valve

• Head ventilation: forced extraction by way of 24V extractors
• Engine room:
• - Natural air intake through air duct with water separator (1 each side)
• - Forced ventilation: 2x24V extractors (1 each side)

• Steering system: hydraulic power steering with 2 round profile rudders.
• Trim tab system: consisting of 2 AISI 316 blades, operated by a hydraulic cylinder, 24V electro-hydraulic control unit

• Water-based system, WORLD version
• 1 compressor in engine room (60,000 total BTU)
• 1 seawater pump with relevant intake
• Each area has its own control panel making it independent

• 1 telescopic boat hook
• 5 anchor lines
• 18 m fender lines
• 1 anchor chain stopper
• 6 fenders
• 6 black fender covers
• 1 Owner's Manual
• 1 AZIMUT document holder
• 1 white book, 2014 edition, English
• 1 AZIMUT YACHTS wecome kit box
• 1 YACHTIQUE booklet
• 1 AZIMUT warranty service booklet
• 1 bottle of "MONSORDO MAGNUM"
• 3 float key-rings
• 1 bag (with logo) for storing the manuals
• 1 remote control holder (with logo)
• 1 routine maintenance kit for steels
• 1 pin wrench for locking stainless steel pins